enLanguage
Home > Knowledge > Content

Maintenance tips of Road Roller in winter

Nov 22, 2024

As the weather gradually turns cold, some parts of China will usher in a large area of snow, your roller is ready for winter? Today, Xiaobian must tell you about the problems that must be paid attention to in winter roller maintenance, so as to avoid your machine "encountering accidents".

01 External cleaning and protection

Because the road is mostly muddy in winter, the road roller is easy to be contaminated with soil during operation. Therefore, the outside of the roller should be cleaned in time after each use to prevent the accumulation of soil from adversely affecting the equipment. After the completion of road construction in winter, the road roller should be parked in a dry and ventilated place, away from the wet and cold environment. Cover the equipment with a cover cloth to prevent damage to the parts of the equipment caused by snow. Apply butter to the exposed parts of the ironing plate, oil cylinder and other parts of the roller to prevent rust. If it is parked indoors, it is also necessary to seal the intake and exhaust ports of the engine with plastic bags.

02 Lubrication system maintenance

In winter, when the temperature is lower, the viscosity of the lubricating oil will increase, which may lead to the failure of the lubrication system. Therefore, it is necessary to check the quality and quantity of lubricating oil regularly, and replenish or replace lubricating oil if necessary. Clean the lubrication system regularly to remove possible impurities and ensure its normal operation. Check whether the pipeline of the lubrication system is smooth and whether there is blockage.

                                                                        info-1-1                                                      

03 Engine Maintenance

The low temperature in winter makes it difficult to start the engine. Before starting the roller, preheat treatment should be carried out first, such as adding hot water to the cooling system to preheat the engine, or using water heating and fire baking to heat the engine oil pan. After preheating, let the engine reach the appropriate working temperature before starting. Check and replace engine oil and filter regularly to ensure proper lubrication and ventilation. In winter, light diesel with low freezing point should be used to improve engine starting performance at low temperature. The choice of the specific diesel type should be determined according to the minimum temperature in the area.

04 Vibration system maintenance

Vibration system is an important part of the road roller, which plays a decisive role in the compaction effect of the road. Temperature changes in winter may cause the vibration system to be affected by condensation water, so it is necessary to check the working status of the vibration system regularly to ensure its normal operation. Pay attention to keep the vibration system clean to prevent impurities from entering and affecting the vibration effect.

                                                                      info-449-349

05 Battery Maintenance

In winter, the liquid level of the battery should be checked and the density of the liquid phase, and the electrolyte density should be kept in the appropriate range to ensure the discharge capacity. At the same time, the electrolyte leakage and corrosion should be prevented. If the equipment is parked for more than 15 days or more, take care to remove the battery and place it in a dry and ventilated place, and keep the battery surface clean and dry.Vibratory Roller

Send Inquiry
Categories
Contact Us
    • Tel: 00852-56158988

    • Email: my@ymo.hk

    • Webwww.hk-myw.com

    • Add: Room S032, 2/F, The Capital 61-65 Chatham Road South, Tsim Sha Tsui, Kowloon, Hong kong.