In principle, the cleaning solution prepared from the cleaning agent first wets the surface of the part, and then penetrates into the contact interface between the dirt and the part, so that the dirt is separated from the surface of the part, dispersed or dissolved in the cleaning solution or the surface of the part. on the surface. After forming an emulsion, the suspension is ready to clean parts.
Common cleaners used for chemical cleaning solutions include LCX-52 Water-Based Metal Cleaner, CW Metal Cleaner, JSH High Efficiency Metal Cleaner, D-3 Metal Cleaner, DJ-04 Metal Cleaner, and NJ-841 Cleaner. Agent, 817-C Oil Cleaner, CJC-8 Liquid Metal Cleaner.
The preparation method, concentration, cleaning temperature and heating method of the cleaning agent must strictly comply with the requirements here. In manual cleaning, the temperature must be strictly controlled and can be cleaned with a brush or cloth. If oil or carbon deposits are heavy, wipe with a wire brush. In order to meet the needs of wetting and immersion, it must be soaked for a certain period of time before cleaning. Washing can be divided into coarse washing and fine washing. If the lotion is not very serious after washing, the floating oil can be removed and reused.
