Engine maintenance: The small rollers produced generally use the diesel engine as the drive, and can be carried out according to the diesel engine maintenance manual. Cleanliness of rollers: After the rollers complete the construction tasks, they must wash away the dirt and dust on the rollers. Special attention should be paid to diesel engines, generators, starting motors, fuel injection pumps, fuel injectors, hydraulic pumps, etc. For clean appearance, it is best to wipe these places clean with a dry soft cloth.
If the roller is left unused for a long time, the water in the engine water tank must be discharged. In winter, the weather is cold, and it should be released after the daily operation. Carefully clean off the dirt and dust on the machine, scrub the outer surface of each part and all lubrication holes with kerosene and inject grease once, and apply butter or anti-rust glue to the unpainted exposed parts.
Transport and transfer of rollers: When transporting rollers over short distances, according to road conditions, rollers can choose to drive to the construction site by themselves at high speed. When transporting the roller at a long distance, the roller should be transported by a flatbed trailer. During lifting and transportation, the safety locking device on the fuselage should be used to lock the frame to prevent relative rotation of the fuselage and the frame. At the same time, the roller should be firmly fixed at Flatbed trailer.
Storage of rollers: The rollers should be stored in a dry warehouse, and it is forbidden to store irrelevant items and gasoline. In case of parking in the open on a rainy day, the ground should be kept dry, and it must be covered with a rainproof cloth. Lubrication of rollers: In addition to the use of pressure-resistant lithium-based lubricants at the hinges and both ends of the steering cylinders, the others use ordinary lubricants.Road roller
