You may not know that seated rollers are much lighter than walk-behind rollers, so we usually see more opportunities for seated rollers than walk-behind rollers. There are shock-absorbing rubber pads on the rollers, which are also relatively easy to damage. So how can we extend the service life of cushions? Don't worry, the car-mounted roller manufacturer will teach you.
Fasten the shock-absorbing rubber pad bolts before work. Regularly clean up the residue on the cushion. Before the compaction operation starts vibration, be sure to set the throttle controller to high speed and then turn on the vibration switch. Regularly clean up the residue on the cushion. When the machine is idle, the machine should be properly prevented, and it is strictly forbidden to expose to the sun or be in a long-term outdoor low-temperature environment. The walk-behind roller has the characteristics of high stability and compactness. It has been widely used in the road engineering, and maintenance work is indispensable during its use. Today we will introduce the maintenance of the walk-behind roller. method:
It is necessary to regularly check the oil, fuel and hydraulic oil volume of the walk-behind roller engine and add new oil to the specified oil mark indication scale as required. Regularly check and eliminate oil leakage from various parts of the roller, and clogging of the vibration plug of the vibration wheel. Regular inspections of hand-held roller instruments and other visible parts shall be conducted. If abnormal operation of the instrument is found, the operation shall be suspended in a timely manner, and the equipment shall be investigated and repaired. Add calcium-based grease to each lubricating nozzle in time to ensure that the equipment has sufficient lubrication, and check the nozzles, joints and filters of the sprinkler system, and regularly clean the walk-behind roller.
