The importance of small rollers must be understood by everyone. Whether you are in road engineering or house construction, you need to use roller equipment. It is not difficult to operate the equipment, the difficulty is how to operate in accordance with the rules accurately. The personnel who operate the rollers are licensed, and it is strictly forbidden for non-professional drivers to work. Do not leave the job without permission, and do not operate machinery that does not comply with the operation certificate. It is strictly forbidden to hand over the mechanical equipment to the personnel without the operation certificate of this model, and it is strictly prohibited to operate after drinking.
Before each operation, check whether the lubricating oil, fuel oil and water are sufficient, whether the various instruments are normal, whether the transmission system and working assembly are complete, and that there are no leakage signs in the hydraulic system and various pipelines. The operator strictly implements the inspection system before work and the careful observation during work and the inspection and maintenance system after work according to the provisions of the manual of the small roller. During construction, first identify the underground stagnation on the site, and assign a person to direct the construction of the machinery to ensure the safety of the underground stagnation and mechanical equipment.
When the mechanical equipment is parked on the construction site, a safe parking place should be selected, the cab (operation room) door should be locked, and the parking brake should be pulled up. When parking on the ramp, use triangular wood or stones to resist the wheels, and someone should take care of them at night. For water-cooled machinery, when the temperature is lower than 0 ℃, water should be released in time after work, or other anti-freezing measures should be taken to prevent frost cracking. During the operation, non-construction personnel are strictly prohibited from entering the construction area, and construction personnel entering the construction site are strictly prohibited from chasing and making trouble.
Before the operation, the peeling box, the operation driver and the construction team leader should thoroughly study and understand the content submitted by the technical person in charge. Among them, the operation driver and the construction team leader clearly remember the type and location of the underground, above ground and air stagnation at the work site (contents include: height of filling and digging, slope slope, underground cable, height of surrounding wires, various pipes, pits and All kinds of stagnation, etc.), construction at this location is subject to the command of the construction leader of the small roller, and no operation without command is strictly prohibited. The cab or operating room should be kept neat, flammable and explosive materials are strictly prohibited to be stored, slippers, smoking and drunk operations are strictly prohibited, and it is strictly forbidden to run the machine with malfunction or overload.
When man and machine are cooperating in construction, personnel are not allowed to stand on the working surface in front of the machine. They must stand outside the machine working surface. When compacting a small roller, it is necessary to manually clean the wheel from the dirt, and the labor should be cleaned behind the roller. It is strictly forbidden to move backwards in the direction of the to prevent personal injury or death when tripping.
