The most common use of graders is to level the ground and bulldoze. Have you ever thought about how to use graders to carry out some simple slope repairs?
According to grader manufacturers, they also consider adding more functions during production, but the survey found that many people do not understand graders, so the function of the grader itself is wasted. Today, let's first understand the method of operating the grader to trim and scrape the slope! First of all, we need to adjust the blade to the left or right before trimming the slope; then when trimming the ditch slope, the scraping angle should be smaller; trimming the subgrade slope, cutting slope, embankment When the edge of the slope or trench is broken, the scraping angle should be larger; and when repairing the vertical slope of scraping cliffs, the scraping angle can be adjusted to 90 degrees.
However, it should be noted that the height of the cliff wall should not exceed the length of the blade, so as to avoid soil collapse and damage to the machine noise. However, for the slope whose width is greater than the length of the grader blade, it is necessary to use two graders to work together at the same time. Scraping, it should be noted that at the beginning, the upper one should go about 10m first, and then the lower one should start working. In this way, the soil scraped by the upper one will not affect the work of the one under the embankment, and at the same time, the operator of the grader under the embankment can connect the two working surfaces to form a complete slope according to the shape of the slope scraped by the grader on the embankment bevel.
As long as you follow the above steps, you will be able to master the use of a grader to trim and scrape slopes with diligent practice.
