A handheld vibratory roller is very common construction equipment. It has a wide range of use, is very convenient to use, and is easy to operate. However, due to the harsh working environment of this equipment, we use it every time. After finishing the equipment, be sure to pay attention to its maintenance and lubrication. It also needs maintenance when it is not in use. Next, I will focus on telling you about it!

1. Oil scraping type: relying on the rotation of the vibration wheel, the sealing plate contains viscous lubricating oil, which flows down the sealing plate and flows to the bearing seat and the vibration bearing, so as to achieve the effect of lubricating and cooling the bearing. But there is a problem - a closed cavity is formed on the bearing seat and the left side of the bearing, the oil cannot be replaced, and the rolling element above the left end of the bearing is not easy to form an oil film, which will shorten the life of the bearing. Therefore, this structure is suitable for small vibratory rollers with relatively small tonnage and less load.
2. Scraper lubrication type: This lubrication is to weld several groups of straight plates and angle steel on the sealing plate to form a funnel-shaped cavity, so relying on the rotation of the vibrating wheel, the sealing plate can carry more lubricating oil, and then from the "funnel" The bottom end of the cavity" flows to the housing and bearing, allowing the bearing to be lubricated and cooled. This lubrication method solves the problem that the amount of oil attached to the sealing plate itself is small.
3. Oil channel lubrication type: This lubrication is to add a reasonable annular oil channel in the bearing seat where the bearing is installed. The oil channel is just matched with the annular oil groove of the bearing, which can allow the lubricating oil to enter and exit so that the inflow and outflow of the lubricating oil will make the bearing It is lubricated and takes away the heat and pollution generated by the working of the bearing so that the bearing is always in fresh "blood", which prolongs the life of the bearing and improves the reliability of the bearing. It is suitable for the large tonnage and large loads. vibratory compact roller.
4. Grease-lubricated type: When designing the vibrating wheel, the sealed maintenance-free bearing is selected, which requires high-quality assembly, high-quality bearing and high-quality grease as the backing. But this also has shortcomings. After the failure of the grease, it is necessary to disassemble and assemble the vibrating wheel again - replacing the bearing or adding grease is not as convenient as replacing the gear oil.
The handheld vibratory roller is the first small-scale foundation compaction machine. It is used in various trench sand backfill compaction, high-rise building basement earthwork compaction, community road foundation compaction, various lawn compaction, repair and repair and various small The use of the project is easy to operate and has a wide range of applications.








