enLanguage
Home > Knowledge > Content

Operation Rules of ZL50F Wheel Loader(1)

Dec 06, 2021

●Please leave all personnel close to the loader.

●Remove all obstacles in the lane and pay attention to dangerous objects such as pits and ditches.

●Pay attention to all windows to be clean, and clamp open or closed doors and windows tightly.

●Adjust the rear-view mirror to have a good line of sight.

●Pay attention to whether the horn of the loader works normally.

●Slowly drive the loader to an open area, and check whether all joysticks and protection devices are working properly.

●The loader should be driven while sitting, and the height of the seat can be adjusted for people.

●The joystick can only be operated when the engine is working.

●Before starting the loader, the driver should make sure that no one will be injured.

●Before working every day, you must check whether the steering system and braking system are normal. If they are abnormal, the loader is not allowed to start.

●The bucket and other working devices should be as close to the ground as possible, about 400mm away from the ground.

●Stop at a safe distance from cliffs, hanging objects and landslides.

●If the loader slides downhill, immediately unload the load and drive the loader down the slope.

●Pay attention to the inclination of the loader when crossing trenches, mounds or other obstacles on mountains, hard soil layers or slopes.

●As far as possible, avoid loader sideways working up and down the slope.


Send Inquiry
Categories
Contact Us
    • Tel: 00852-56158988

    • Email: my@ymo.hk

    • Webwww.hk-myw.com

    • Add: Room S032, 2/F, The Capital 61-65 Chatham Road South, Tsim Sha Tsui, Kowloon, Hong kong.