The editor will explain the working principle of the four-stroke horizontal bar of the gasoline engine on the hand-held roller: Generally, there are four pistons on the gasoline engine. These four pistons can be divided into intake, compression, workmanship and exhaust according to their functions. Formation, the following is the running process of 4 strokes.
The intake stroke is driven by the piston crankshaft when the intake stroke is active, and runs from top dead center to bottom dead center. At this time, the exhaust valve is closed, while the intake valve is opened. The top-to-bottom operation causes the cylinder internal volume to gradually increase, and a vacuum will form between them, so the mixture is drawn into the cylinder through the intake valve. When the piston reaches bottom dead center, the entire cylinder is filled with air-fuel mixture.
Compression stroke: The piston moves from the bottom dead center to the top dead center under the drive of the crankshaft (this point is opposite to the intake stroke). At this time, the exhaust valve is still closed, and the intake valve begins to gradually close. With the upward movement of the piston, the internal volume of the cylinder decreases. Because both the intake valve and the exhaust valve are closed, the mixture entering the cylinder is compressed, and its temperature and pressure increase until the piston compresses when it reaches top dead center. End of the trip.
Work stroke: When the piston moves close to the top dead center of the compression stroke, the spark plug flashes to ignite the gas mixture in the cylinder. At this time, the intake valve and exhaust valve are both closed, and the temperature and pressure of the gas in the cylinder increase at the same time. Push the piston to move from top dead center to bottom dead center, and push the crankshaft to rotate through the connecting rod to output mechanical energy.
Exhaust stroke: At the end of the power stroke, the gas in the cylinder pushes the piston to the bottom dead center, and the mixture in the cylinder also becomes exhaust gas due to combustion. At this time, the exhaust valve is opened, the intake valve is still closed, the piston is driven by the crankshaft from the bottom dead center to the top dead center, and the exhaust gas in the cylinder is discharged through the exhaust valve until the piston reaches the top dead center, the exhaust stroke End.












